Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Your Daily Blog / Helping JimT out with an inframe ...

new reply
Helping JimT out with an inframe ...
04-03-2022, (Subject: Helping JimT out with an inframe ... ) 
Post: #130
Rawze Offline
Forum Reject  (13903 Likes)  *******

 		Posts: 10,997
Joined: Jun 2013
Thanks: 5885
Given 13903 thank(s) in 6071 post(s)
RE: Helping JimT out with an inframe ...
(04-03-2022 )Agentspd Wrote:  ...
Wondering if you seen any results of magnets in oil pan. Been any positive feedback from SOHC engines in particular. I think its a very good idea.[/size][/font]

I have not had the pan off yet since I did this.

It just makes sense to have something in the bottom of the pan to collect metal shavings though. The rear ends have them, other gearboxes have them, etc. so I thought ... why not the engine?.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Helping JimT out with an inframe ... - Rawze - 04-03-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication