7 codes J1939 system down
08-28-2020, (Subject: 7 codes J1939 system down ) 
Post: #3
RE: 7 codes J1939 system down
Right now it's 120 ohms with the 14 pin connector unplugged and the nox sensor both connected and dis connected. The batteries are disconnected also. I found the terminating resistor in the harness it tests good. Wouldn't the circuit be at 60 ohms if the nox sensor was unplugged or bad?


User's Signature: im_seeing_parameters_in_my_sleep 1
replyreply


Messages In This Thread
RE: 7 codes J1939 system down - tree98 - 08-28-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.