Cm871 hammering, poor thing
10-23-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #10
RE: Cm871 hammering, poor thing
[attachment=7231]
replyreply
10-23-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #11
RE: Cm871 hammering, poor thing
   
replyreply
10-23-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #12
RE: Cm871 hammering, poor thing



Of course it’s upside down LOL about how my week has gone
replyreply
10-23-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #13
RE: Cm871 hammering, poor thing
Well light scoring seems to be the norm. I think all my rollers and lobes have a line or two in them. And they've had them for a few hundred thousand miles.
replyreply
10-24-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #14
RE: Cm871 hammering, poor thing
If it can't be felt with a fingernail it should be good
replyreply
10-24-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #15
RE: Cm871 hammering, poor thing
(10-24-2020 )marek4792 Wrote:  If it can't be felt with a fingernail it should be good



Thank both of you for your responses. I have spent more time researching wear in the cam and head in general. Going to inspect everything better again. Sounds like I will be okay to just run it.
replyreply
10-31-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #16
RE: Cm871 hammering, poor thing
Happy Halloween everyone.

Quick couple questions. I now have calterm, insite, and my inline6. Is there a YouTube tutorial on how to copy and send ecm file to Rawze? Or since I have the {name removed} sent me do I just upload that on my ecm? Is there a site or somebody I can pay to help me understand how to use and what program to use to accomplish this?

Thank you
replyreply
11-01-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #17
RE: Cm871 hammering, poor thing
(10-31-2020 )txfarmer Wrote:  Happy Halloween everyone.

Quick couple questions. I now have calterm, insite, and my inline6. Is there a YouTube tutorial on how to copy and send ecm file to Rawze? Or since I have the {name removed} sent me do I just upload that on my ecm? Is there a site or somebody I can pay to help me understand how to use and what program to use to accomplish this?

Thank you

if u got CT then you should also have a couple docs on how to pull the file out of your ecm along with all that stuffs.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
12-04-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #18
RE: Cm871 hammering, poor thing
UPDATE.

Sorry it’s been awhile guys. We have it fixed.

The dampener fixed 100% of the rattle and hammering issues. Truck is SO much smoother. Mr Price from PA that Rawze recommended did my tuning. Like a new truck, thanks for everyone’s help!
replyreply
 Thanks given by: hookliftpete , Chamberpains , marek4792 , Waterloo




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.