Cm871 hammering, poor thing
10-23-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #10
RE: Cm871 hammering, poor thing
[attachment=7231]
replyreply
10-23-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #11
RE: Cm871 hammering, poor thing
   
replyreply
10-23-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #12
RE: Cm871 hammering, poor thing



Of course it’s upside down LOL about how my week has gone
replyreply
10-23-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #13
RE: Cm871 hammering, poor thing
Well light scoring seems to be the norm. I think all my rollers and lobes have a line or two in them. And they've had them for a few hundred thousand miles.
replyreply
10-24-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #14
RE: Cm871 hammering, poor thing
If it can't be felt with a fingernail it should be good
replyreply
10-24-2020, (Subject: Cm871 hammering, poor thing ) 
Post: #15
RE: Cm871 hammering, poor thing
(10-24-2020 )marek4792 Wrote:  If it can't be felt with a fingernail it should be good



Thank both of you for your responses. I have spent more time researching wear in the cam and head in general. Going to inspect everything better again. Sounds like I will be okay to just run it.
replyreply





  
  
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication