Plungers stuck on ISX 12 CM2250 |
10-07-2020, (Subject: Plungers stuck on ISX 12 CM2250 ) Post: #4 | |||
| |||
RE: Plungers stuck on ISX 12 CM2250 (10-07-2020 )RMKC MIKE Wrote: By whole thing, are you referring to whole pump or head? If you mean head, Cummins doesn't have a head for the pump that came on this truck. I know nothing about the X12, but if like the CM-2250, cummins updated the pump from I believe three cylinders to two, or vice versa. Odds are, you need an entire new pump. I would register the motor on quickserve, you will need your engine serial number (EIN), register it and see what Cummins says in the manual and parts section, you will see everything the dealer sees. https://quickserve.cummins.com/info/index.html User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Plungers stuck on ISX 12 CM2250 - RMKC MIKE - 10-07-2020, RE: Plungers stuck on ISX 12 CM2250 - Magard - 10-07-2020, RE: Plungers stuck on ISX 12 CM2250 - RMKC MIKE - 10-07-2020, RE: Plungers stuck on ISX 12 CM2250 - Waterloo - 10-07-2020 RE: Plungers stuck on ISX 12 CM2250 - RMKC MIKE - 10-08-2020, RE: Plungers stuck on ISX 12 CM2250 - Waterloo - 10-08-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.