New problems after inframe from cummins |
10-24-2020, (Subject: New problems after inframe from cummins ) Post: #2 | |||
| |||
RE: New problems after inframe from cummins TBH honest hard to say it could have the front caps leaking they would have taken off to remove head the cam thrust plate... This is why when people price us they say oh man thats high but on ALL of our over hauls we replace the front structure gaskets and front seal. Depending on the miles we replace the harmonic damper as well ...... You should be able to tell if its leaking about the desk of block from either side then its from them for sure.. However if its leaking lower corner where pan and all meet then its front cover... Good luck on this | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
New problems after inframe from cummins - Deuce7500 - 10-24-2020, RE: New problems after inframe from cummins - Mr Hagg - 10-24-2020 RE: New problems after inframe from cummins - Pigpen 2869 - 10-24-2020, RE: New problems after inframe from cummins - smorgan87 - 10-24-2020, RE: New problems after inframe from cummins - SquareOne - 10-24-2020, RE: New problems after inframe from cummins - Pigpen 2869 - 10-24-2020, RE: New problems after inframe from cummins - Rawze - 10-24-2020, RE: New problems after inframe from cummins - Lonestar10 - 10-24-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.