ISX 870 tuning questions

[Precisionw900]

Hey gents, new to the forum but have been reading for some time. I have an 04 isx 870 with 390k that came out of California. It had an added after treatment system that has been removed. I had my local dealer restore a factory tune but was informed it would be the lastest revision. To be honest they didn’t seem very knowledgeable or helpful. I would like some direction amongst you Cummins gurus on a safe and reliable tune just to make sure it is correct and what do I need to do or who do I need to contact?
Im no stranger to wrenches but machanical motors is what I know so tuning is somewhat new to me. Any information or advice would be greatly appreciated. Thanks

[marek4792]

I'd get ahold of Mommaburt, or Mr. Haggai
Before any tuning you should do the "EGR tuneup which on an 870 consists of the following sensors..
-boost pressure on intake manifold
-intake temperature on intake manifold
-exhaust pressure and tubing at t-stat housing
-egr differential pressure and tubing behind the fuel lift pump