Volvo 670 with 2250
12-21-2020, (Subject: Volvo 670 with 2250 ) 
Post: #8
RE: Volvo 670 with 2250
(12-21-2020 )Waterloo Wrote:  No, hollow the cans out, get all of the restrictions out. The SCR can is the one that will be a bear, you can leave it on and pound it out with a metal rod or anything that is sturdy, and long enough to get to the end of the can. Odds are, it was not touched and is still intact. Or, drop it, cut the end off, clean it out and weld the end back on. Either or, a PIA.

Pretty sure it was not touched as I only recall the shop taking 2 cans out and poking the hole on them. Will definitely work on this project on the next couple of days, I'm going to try to fix the ecm issue first. I was considering taking the trip to see Mr. Hagg but this being the holidays I don't know his availability, that and I'm 800miles away.
replyreply


Messages In This Thread
Volvo 670 with 2250 - Volvo670 - 12-20-2020,
RE: Volvo 670 with 2250 - JimT - 12-20-2020,
RE: Volvo 670 with 2250 - Volvo670 - 12-21-2020
RE: Volvo 670 with 2250 - JimT - 12-21-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.