Need help with SPN 151
12-29-2020, (Subject: Need help with SPN 151 ) 
Post: #1
Need help with SPN 151
Good morning everyone
I need help with this fault code I m getting in J1939 daralink messages in IN$ITE. I replaced my speed sensor and tested wiring for malfunction but I cant seem to fix it. I have attached a picture for reference.
Truck is 2016 Peterbilt with 18 speed, isx15

Anyone else face the same thing before?
If you can point me in the right direction

Thanks and happy new year


Attached File(s)Thumbnail(s)
   
replyreply
12-29-2020, (Subject: Need help with SPN 151 ) 
Post: #2
RE: Need help with SPN 151
The screen shot shows no faults.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
12-31-2020, (Subject: Need help with SPN 151 ) 
Post: #3
RE: Need help with SPN 151
(12-29-2020 )Rawze Wrote:  The screen shot shows no faults.

Clear as day
replyreply
12-31-2020, (Subject: Need help with SPN 151 ) 
Post: #4
RE: Need help with SPN 151
However, I do see SPN 191 in the trans module. Insite is only for Engine ECM. Might have to connect with transmission mfg software.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.