blow by , oil consumption
01-28-2021, (Subject: blow by , oil consumption ) 
Post: #5
RE: blow by , oil consumption
The stealers$its are the worst places to have an inframe done on an ISX. They are not going to do anything much to actually extend that engines life most of the time, but rather only change the bare minimum parts to get whatever complaint to go away+ do a horrible short-cutted job from h#ell.

Here is a mighty fine example of this. We had to tear this engine down only 80k miles after the stealerS4it put more than $40,000 in parts/labor into this engine :
http://rawze.com/forums/showthread.php?t...6#pid25356

If someone tried to sell me a truck with a fresh inframe/overhaul,.. I would not pay anything higher than what i would pay for a truck with a blown engine these days.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Waterloo , Toolguy


Messages In This Thread
RE: blow by , oil consumption - Rawze - 01-28-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.