Is it mandatory for a 5 inch pound torque wrench

new reply

Threaded Mode | Linear Mode

Is it mandatory for a 5 inch pound torque wrench

02-01-2021, (Subject: Is it mandatory for a 5 inch pound torque wrench )

Post: #6

90petercar Offline

Established (0 Likes)

Posts: 7
Joined: May 2017

Thanks: 2
Given 0 thank(s) in 0 post(s)

RE: Is it mandatory for a 5 inch pound torque wrench

I'm trying to set the whole overhead..valves injectors and jake..its on a cm 570 signature 600. My Jake doesn't seem to want to work on the low setting unless its right at 1500 rpm

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Chamberpains - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - marek4792 - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Waterloo - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-01-2021

RE: Is it mandatory for a 5 inch pound torque wrench - Rawze - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Waterloo - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Rawze - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - JimT - 02-04-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Rawze - 02-05-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - JimT - 02-05-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.