| Dosser injector fitting |
| 03-17-2021, (Subject: Dosser injector fitting ) Post: #3 | |||
| |||
| RE: Dosser injector fitting The nut should turn independent of the fitting. I think the pressure on that line is the same as the injection pressure...260 to 300 psi. Those clamps should be compression clamps. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Dosser injector fitting - Lead_sled - 03-17-2021, RE: Dosser injector fitting - Lead_sled - 03-17-2021, RE: Dosser injector fitting - Nilao - 03-17-2021 RE: Dosser injector fitting - Lead_sled - 03-17-2021, RE: Dosser injector fitting - Nilao - 03-17-2021, RE: Dosser injector fitting - Lead_sled - 03-17-2021, RE: Dosser injector fitting - Nilao - 03-17-2021, RE: Dosser injector fitting - Lead_sled - 03-17-2021, RE: Dosser injector fitting - Nilao - 03-17-2021, RE: Dosser injector fitting - Rawze - 03-17-2021, RE: Dosser injector fitting - Lead_sled - 03-17-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.