Sensors before and sensors after demandy?
03-23-2021, (Subject: Sensors before and sensors after demandy? ) 
Post: #3
RE: Sensors before and sensors after demandy?
(03-23-2021 )farbeyonddriven Wrote:  I see lots of wire harnesses tied up or taped up. Also the back pressure sensor wires cut off...sensor is now a plug doing nothing...

I would look into ordering a new engine harness. Once they are hacked into like you describe, they are essentially shot in my book.


User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.
replyreply
 Thanks given by: farbeyonddriven


Messages In This Thread
RE: Sensors before and sensors after demandy? - Waterloo - 03-23-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.