Cm2350 fuel leak down
04-26-2021, (Subject: Cm2350 fuel leak down ) 
Post: #1
Cm2350 fuel leak down
So did injector leak down on old man's new truck and it failed miserably. Well found relief valve leaking that helped some but not much.

There is fuel being pushed into the return system so much that it comes up and out the banjo fitting when the bolt isn't installed. I'm thinking this fuel could only be coming from the injector quills? As bad injectors leak into the cylinders? Or is there more than that? Otherwise I'm thinking just throw 6 new quills in torque to spec and call it good or am I wrong? As the truck loses rail pressure from 29k to under 8k in 2 minutes.


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
replyreply
04-26-2021, (Subject: Cm2350 fuel leak down ) 
Post: #2
RE: Cm2350 fuel leak down
could try re-torquing the old ones first and do the test again.

After that, you need to start plugging the lines off (up to 3 at a time) and find out which injector(s) the leak is at.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.