Oil Temp Gauge Install?
06-06-2021, (Subject: Oil Temp Gauge Install? ) 
Post: #6
RE: Oil Temp Gauge Install?
(06-05-2021 )Drichardson1987 Wrote:  I was looking to get some info on adding a Oil Temp gauge to my 2010 ISX CM871. Truck is a 2010 Pete 388 and it was ordered as a basic fleet truck with the minimal gauge package. I am wondering if there is a place in the harness to tie into to add a temp gauge from the sensor the ECU reads? If not, I am open to an aftermarket gauge with a temp sending unit, but I would need to know where on the engine i can access a port to add the oil temp sending unit. (it looks like most are 1/8 npt)
any input would be greatly appreciated!

The factory gauge would be the easiest solution.

Next to that, you should read thru the the thread that tree98 posted.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: Oil Temp Gauge Install? - Rawze - 06-06-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.