Cm870 starts then shuts off,starts back up with a puff off white smoke and stays runn |
07-18-2021, (Subject: Cm870 starts then shuts off,starts back up with a puff off white smoke and stays runn ) Post: #32 | |||
| |||
RE: Cm870 starts then shuts off,starts back up with a puff off white smoke and stays runn (07-18-2021 )Redland1 Wrote: Do you have a particular feeler gauge you use? I’m looking on Amazon and can’t find one that has the measurements needed? I went to AutoZone and bought one of their sets that had the proper gauge for each step, I found it in one set. Then I removed those particular gauges and put long zip ties on them for easy removal if I dropped them in the head. The large 7mm gauge I bought the Cummins one, but here is one for much less, https://amzn.to/3z2SA42 Here is the fuel injector torque wrench, I bought mine at AutoZone for around $12 https://amzn.to/3ez6zH4 For the valves/exhaust, I use the foot lb and inch lb, both set to the proper torque... https://amzn.to/3imttCn https://amzn.to/3ezA6QG And a crows foot adapter... I think you need a 19mm, it is in the video... https://amzn.to/3in0vCy User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields. | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.