Oil filter level

[SquareOne]

(08-03-2021 )JimT Wrote:  ...For the fuel filter on my 2250, I carefully unscrew it and lower it down to rest on the lift pump or whatever is actually lined up below it inside the frame rail. My Davco is mounted there too so it's hard to see or reach in. Then I use a little hand pump from harbor freight to transfer most of the fuel into another container before tipping and turning the filter to get it out of the tight space. This reduces my spillage to just what drips from the filter mount before I can install the new one.

Exact same procedure I use for my filter on my 2350. Tilt that damn thing just a hair and its spilling over. The few pumps to remove some of the fuel in the filter makes all the difference!