Buying 2015 isx 2350 234k miles high hours
10-05-2021, (Subject: Buying 2015 isx 2350 234k miles high hours ) 
Post: #33
RE: Buying 2015 isx 2350 234k miles high hours
(10-05-2021 )FnG92 Wrote:  Bought the rollers, tappets, and plungers from cummins today for the 2350. Is it bad if I have a mechanic do the rebuild on the fuel pump? I'm a little intimidated by the thought of messing something up that could destroy the motor.

It's not hard at all. Just clean everything surrounding it and above it really good before you take the head off so you don't knock dirt and grit down into it.

If you don’t already have a quickserve account you need to open one. It's free and will give you all the information you need to do this correctly including torque specs.

PAY CLOSE ATTENTION TO THE PROPER WAY TO BLEED PRESSURE FROM THE RAIL!!! THIS IS DANGEROUS STUFF THAT CAN HURT YOU SEVERELY!!! sounds scary I know but just read through the procedure you'll see it's not bad.

Take your time and you won't have any problems. Here's a couple videos that will help as well.

https://youtu.be/wKLV4gAUl6o

https://youtu.be/-Gu5Eyx2SWw


User's Signature: im_seeing_parameters_in_my_sleep 1
replyreply
 Thanks given by: hookliftpete


Messages In This Thread
RE: Buying 2015 isx 2350 234k miles high hours - tree98 - 10-05-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.