871 mess

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 05-04-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

871 mess

10-23-2021, (Subject: 871 mess )

Post: #2

Nostalgic Offline

Offline

Contributing Member (543 Likes)

Posts: 625
Joined: Apr 2017

Thanks: 664
Given 543 thank(s) in 283 post(s)

RE: 871 mess

Ok, I have to ask...

What rocker bolt? Rocker shaft bolt? I assume if that caused the spun rod bearing, all of the cam bearings were toast too?

Injector cam gear is 161 lbs, plus 90 degrees.
Valve cam is 109 lbs.

Quickserve has changed the specs several times on BOTH cam gears recently. I know when I did my valve cam, it was a certain lb, plus degree, and now they've changed it back to a straight lbs torque. But either way, 100 lbs and 1 1/2 flats is not nearly tight enough to hold an injector cam gear.

As for where the aluminum came from... Old style oil pump, oil thermostat housing, someone cross thread an oil filter and eff up the threads or do something goofy with the oil thermostat?

Return to Top | find

Thanks given by:

« Next Oldest | Next Newest »

Messages In This Thread

871 mess - CANNONBALL - 10-23-2021,

RE: 871 mess - Nostalgic - 10-23-2021

RE: 871 mess - CANNONBALL - 10-23-2021,

RE: 871 mess - Nostalgic - 10-23-2021,

RE: 871 mess - Rawze - 10-24-2021,

RE: 871 mess - Nostalgic - 10-24-2021,

RE: 871 mess - Rawze - 10-24-2021,

RE: 871 mess - tree98 - 10-24-2021,

RE: 871 mess - CANNONBALL - 10-24-2021,

RE: 871 mess - Rawze - 10-24-2021,

RE: 871 mess - CANNONBALL - 10-24-2021,

RE: 871 mess - Running rough - 10-24-2021,

RE: 871 mess - CANNONBALL - 10-24-2021,

RE: 871 mess - Mr Hagg - 10-25-2021,

RE: 871 mess - Rawze - 10-25-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design