N14 celect plus program question
12-04-2021, (Subject: N14 celect plus program question ) 
Post: #1
N14 celect plus program question
Below is the engine I am rebuilding and trying to find the correct program for it. The ecm came off another motor and I’d like to get it back programmed myself without having Cummins do it since they will like put a “cleaner epa” file on it. Any advice?


Attached File(s)Image(s)
./uploads/202112/post_5498_1638649032_f8b16c5db0181b39f3fb689bab2c842a.png
replyreply
12-04-2021, (Subject: N14 celect plus program question ) 
Post: #2
RE: N14 celect plus program question
yeah.. just like the info says.. it takes program 'C10462.xx'.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Luckyjayb
12-04-2021, (Subject: N14 celect plus program question ) 
Post: #3
RE: N14 celect plus program question
That’s what I figured, just didn’t know the 3 letter code for Calterm for that engine and want to make sure I get the older file.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.