Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / 09 Cummins 871 with ultrashift

new reply
09 Cummins 871 with ultrashift
12-21-2021, (Subject: 09 Cummins 871 with ultrashift ) 
Post: #5
RollinCoal Offline
Established  (184 Likes)  **

 		Posts: 294
Joined: Sep 2017
Thanks: 23
Given 184 thank(s) in 125 post(s)
RE: 09 Cummins 871 with ultrashift
(12-21-2021 )Mr Hagg Wrote:  Half inch drive air impact is what happen.. I see it all the time guys will pull trans in that way too...
That with even a 36 inch ext to reach to the back and it will never stop turning and will remove all them threads.... I done it once as a rookie lol
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: 09 Cummins 871 with ultrashift - RollinCoal - 12-21-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication