22.5 drive tire recommendation

[SquareOne]

Im running the B/S's as well (M713's)...think it's just an updated version of the M710's Rawze is running. I wrote a little info on them in a previous thread. They seem to be holding up well although they did cost me some fuel mileage compared to my last set of drives. The additional tread depth should combat that negative once these are wore in.

http://rawze.com/forums/showthread.php?tid=7408&page=3 ---- see post 23

I'm running a short (usually heavy) daycab Cascadia. I go into some tight spots for deliveries. Hard turns will certainly scrub the hell outta these, but since you're a single that won't be an issue.

I too am running those Zennas, but mine are on the trailer...def won't run them again. I'm trying to squeeze as many miles as possible out of them (at 200k now). They seem to be a very very cheaply made tire. Bare minimum at best. If I were going in places which promoted tire issues/injuries, say a landfill or junkyard for example, then I'd have no issue running them just for the fact they're cheap to sacrifice. They seem light compared to other name brands and they also wear strangely where my others did not. Puncture resistance certainly doesn't exist as I've repaired these damn things in the driveway more than I'd care to remember since installing them in 2020.