870 isx replacing a 871isx.
01-31-2022, (Subject: 870 isx replacing a 871isx. ) 
Post: #2
RE: 870 isx replacing a 871isx.
no need to over-complicate it.

put the original CM871 ecm, wiring harness + IMAP, manifolds, and other hardware and sensors on it .. including putting the CM871's far superior, electronic VGT turbo on it too. Then have a custom program made to run it. Do not let anyone that is not recommended directly from this forum to make the program. You will end up with only half-arssed garbage that just destroys the engine (or the turbo) and you will regret it.

that is what i would do if in that situation any ways.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: 870 isx replacing a 871isx. - Rawze - 01-31-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.