M100 steering pump input shaft seal leaking
02-18-2022, (Subject: M100 steering pump input shaft seal leaking ) 
Post: #9
RE: M100 steering pump input shaft seal leaking
I replaced just the outer seal on mine. You just knock in the new one with a socket or something. I had a brain malfunction and gouged it all up getting it out, instead of just drilling a small hole in it and putting a screw in it and prying it out. But I was able to fill in the gouges in the outer walls of the opening with a tiny amount of JB Weld, then install the seal and it’s been ok.
replyreply
 Thanks given by: Redland1


Messages In This Thread
RE: M100 steering pump input shaft seal leaking - Mrkentee - 02-18-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.