Hey guys please help been stuck for a week with this issue
04-05-2022, (Subject: Hey guys please help been stuck for a week with this issue ) 
Post: #4
RE: Hey guys please help been stuck for a week with this issue
That is a pretty common issue with CM871's (a 2009 ISX engine) and also with Pete 386's.

A)> First and foremost, that ecm is notorious for this random shutdown issue as they age. You say you have replaced it 3 times but this still does not rule it out. Start the truck up and let it idle ... smack the crap out of the top of the ECM casing. straight downwards, .. almost enough to dent its casing, with the larger end a 1/2 inch extension bar or some other solid object that will reach the top of it ... and see if the engine cuts out. If it does then it is a known issue and therefore a bad ecm.
Here is a nice example of someone replacing ecm and still having this same issue ... : http://rawze.com/forums/showthread.php?t...0#pid12320

AND/OR its is almost always ...

B)> those 386's have a wire that goes to the batteries that is a small one. Maybe a 30 amp fuse or something .. at the battery terminals. That fuse and wire likes to short out causing the ecm to randomly die. here is some info on why they do this...
ref: http://rawze.com/forums/showthread.php?t...05#pid3505


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: 09Pete386 , JimT , Mrkentee , zero4 , Toolguy


Messages In This Thread
RE: Hey guys please help been stuck for a week with this issue - Rawze - 04-05-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.