Head fire rings

[Rawze]

(05-20-2022 )Scooby d Wrote:  Getting off the original topic here but I had said that I would post some results. I had found moisture on #6 valve. Rawze suggested that I Pressure system back up and look for water on bottom of liners. Bolted a couple things back on and put 15 psi in radiator. Took a while but eventually got a drip around #6 cylinder. Pulled head and found a tiny blow out in head gasket. Motor has never been apart since factory but some of the bolts were definitely not as tight as others. I wish I would have checked torque on them when loosening. Going to check liner height this weekend.

Be sure to build it as recommended here.. to minimize and potential problems in the future with it...
ref: http://rawze.com/forums/showthread.php?t...6#pid70606