Truck doesn’t change gears smoothly
06-22-2022, (Subject: Truck doesn’t change gears smoothly ) 
Post: #3
RE: Truck doesn’t change gears smoothly
(06-22-2022 )Rawze Wrote:  If you have leaky injectors or if the metering actuators are leaking and worn out, it can be harder then normal to shift, as the engine does not rev down as well as it should when letting off the fuel pedal.


Run an overhead valve adjustment again and then do an injector leak test on it.
http://rawze.com/forums/showthread.php?t...8#pid67948

A person can also monitor the live fuel flow into the engine to see if it goes to zero mg/stroke while idling.. or fluctuates around up and down like a sign wave. This is an indication that there are issues with a metering actuator.


Thanks! I think I’m leaning toward the actuators. It has done the same thing with two different long blocks. How can I tell which actuator is the one giving me problems. Metering on the outside timing on the inside correct?
replyreply


Messages In This Thread
RE: Truck doesn’t change gears smoothly - Zocaid - 06-22-2022
RE: Cm870 rough shift - tree98 - 02-04-2024,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.