Stumped on no CC or Jake brake
10-07-2022, (Subject: Stumped on no CC or Jake brake ) 
Post: #24
RE: Stumped on no CC or Jake brake
(09-26-2022 )Rawze Wrote:  just a thought...

Make sure the J1939 netowrk for the vehicle (and also the #2 network for the engine) shows 60-ohms with everything shut off for more than 2 minutes.

Checked the voltage, pin an and c only shows .7-.9v and fluctuate. Pin A and D show a steady 2.54
replyreply


Messages In This Thread
RE: Stumped on no CC or Jake brake - SRTDiesel - 10-07-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.