Stumped on no CC or Jake brake
10-07-2022, (Subject: Stumped on no CC or Jake brake ) 
Post: #26
RE: Stumped on no CC or Jake brake
(10-07-2022 )SRTDiesel Wrote:  
(09-26-2022 )Rawze Wrote:  just a thought...

Make sure the J1939 netowrk for the vehicle (and also the #2 network for the engine) shows 60-ohms with everything shut off for more than 2 minutes.

Checked the voltage, pin an and c only shows .7-.9v and fluctuate. Pin A and D show a steady 2.54

Your not checking for voltages.. your need to check for proper RESISTANCE/OHMS once everything switched off for a few minutes.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: Stumped on no CC or Jake brake - Rawze - 10-07-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.