Egr valve

[Gill Oruga]

(01-01-2023 )4MiraclesT Wrote:  So record all sensors for the full regen or just a portion? Also my turbo and actuator were replaced 1.5 years ago with a cummins reman unit but it shows on quickserve that my turbo replacement is covered till 2027 i wasnt sure if my scr was a qualified one because i cant see the little dimples they say to look for in the tsb release notes

When you go to data monitor just double click all parameters and then hit record.

Perform the stationary regen on the ecm test tab and once it finishes the regen make sure you save the log in a place you remember to be able to attach it and email it.