| Overhead |
| 09-11-2016, (Subject: Overhead ) Post: #3 | |||
| |||
| RE: Overhead What do you mean by "no lash"? The rockers do not have the detent position... Or From the detent position to the exhaust valve there is no or less than 0.020 after correct adjustment? The correct valve pin to jake rocker lever clearance is 0.276" or 7mm. Can you post a pic...I don't seem to follow, the rocker should not contact the head anywhere. It should only have three points of contact, the mounting on the rocker shaft, roller to cam, rocker to valve pin. User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..." | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Overhead - dbl overdrive - 09-11-2016, RE: Overhead - Signature620 - 09-11-2016, RE: Overhead - Hammerhead - 09-11-2016 RE: Overhead - Rawze - 09-11-2016, RE: Overhead - dbl overdrive - 09-11-2016, RE: Overhead - Signature620 - 09-11-2016, RE: Overhead - Rawze - 09-11-2016, RE: Overhead - dbl overdrive - 09-11-2016, RE: Overhead - Rawze - 09-11-2016, RE: Overhead - dbl overdrive - 09-11-2016, RE: Overhead - Rawze - 09-11-2016, RE: Overhead - dbl overdrive - 09-11-2016, RE: Overhead - dbl overdrive - 09-11-2016, RE: Overhead - Signature620 - 09-11-2016, RE: Overhead - dbl overdrive - 09-24-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.