boost and pyro gauge
04-23-2023, (Subject: boost and pyro gauge ) 
Post: #1
boost and pyro gauge
looking for boost and pyro gauge for cm2350
any recommendations?
i looked up on e>bay for it but theres couple of options there
clamp egt to exhaust manifold or install it after turbo?


thank you for the replay
replyreply
04-23-2023, (Subject: boost and pyro gauge ) 
Post: #2
RE: boost and pyro gauge
These are what many here use... I just put a set on my new truck and my original set has about 450k on the other truck. Seem to be reliable and work well. Pyro had a couple hiccups, but nothing that prevented me from purchasing again. My pyro is clamped to the manifold on both trucks (CM2350 and an X15). Reads accurate as well. This was verified with a digital temp gun.

https://amzn.to/41WHPyJ

https://amzn.to/41w9Kp7
replyreply
 Thanks given by: ktblogistics
04-24-2023, (Subject: boost and pyro gauge ) 
Post: #3
RE: boost and pyro gauge
I’ve used TeL Tek gauge’s, there twice the price of glowshift” there customer service is excellent. There Lifetime warranty and they honor it , made in America” Nevada based.
replyreply
 Thanks given by: Rawze , ktblogistics
05-11-2023, (Subject: boost and pyro gauge ) 
Post: #4
RE: boost and pyro gauge
I shelled out on some isspro gauges.. custom made .. but they kinda match oem look on my peterbilt.. so far they’ve been flawless


Attached File(s)Thumbnail(s)
   
replyreply
 Thanks given by: ktblogistics




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.