Needed plumbing for Holset reinstall.
04-25-2023, (Subject: Needed plumbing for Holset reinstall. ) 
Post: #2
RE: Needed plumbing for Holset reinstall.
Might be cheaper if you go to a junk yard and get some of those secondary components off a wrecked engine?.

just a thought.


As far as what you need, just register your engine ser# over on quickserv.com. - It is free, and you will have access to all the drawings, parts lookup, repair procedures, etc. and other stufs for your engine just like any stealers$it would have.

I sucks having to put all that stuffs back on after someone makes those kinds of mistakes with the engine like that. I have met plenty of people who have had to go thru that.

Believe me when I say that every single one of those people deeply regretted ever going down that garbage no-vgt road. This, once they finally got the engine straitened out properly, and saw how much better the engine ran, performed, etc. when it was all put back right again and actual proper programming was installed to go with it.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Bengy88 , Volvo8873 , Ironwagons , cybernetictrout


Messages In This Thread
RE: Needed plumbing for Holset reinstall. - Rawze - 04-25-2023



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.