DIY Flywheel housing gasket/clutch/RMS

[Rawze]

(05-21-2023 )RollinCoal Wrote:  Depends
If your closet Mississippi I could do it
And buy a new housing, they warp thats why they start leaking
Why they warp idk unless that robot is not torqueing them right

The harder the truck in driven, the more the flywheel housing will warp over time due to the twist/stress between the block and tranny under high operating loads.

I.E.> The harder the truck is driven ... + the more torque its set at, the earlier in their lifespan the FWH gasket will start to leak.