DIY Flywheel housing gasket/clutch/RMS |
05-28-2023, (Subject: DIY Flywheel housing gasket/clutch/RMS ) Post: #16 | |||
| |||
RE: DIY Flywheel housing gasket/clutch/RMS (05-23-2023 )Rawze Wrote: I would recommend an actual tranny jack.. and strapping it down well. A truck tranny suddenly shifting can put you in the hospital real fast, if not kill you if it rolls off the jack and onto any part of you.I can 100% agree with this. I had a tranny jack that I bought used from someone collapse and fall on me a few years back. The cylinder blew out. When it did it landed on my hand and cut it 80% of the way off. Since then I play no games with transmissions. I have plates that I have made so that I can bolt transmissions securely to the jacks and everything. Don’t take any chances man. I’m just a few hours away from Savannah and I could do the job for you but I’m booked for like 3 months on bigger jobs | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.