Paccar mx13 epa13 coolant in fuel!!!

[Rawze]

(11-16-2023 )Nerv Wrote:  ... This industry does not pay enough to warrant a repair like that
...
I would buy OEM sleeves if I could
...

If you cannot afford to maintain your equipment properly.. and your not getting paid enough to do so, then it is your business strategy that is at fault here, and not 'the industry' as you have put it. People should not blame 'the industry' for their money problems. Trucking is a low-rent-rate, narrow profit margin industry, and has been for about 30+ years or more now.

It takes a good business sense, managing your moneys, and more importantly, managing your operating costs (fuel costs being #1) effectively + saving for those long term major repairs/equipment replacements. This is NOT 'the industries' fault if someone cannot learn how to make decent profits in today's modern trucking scene.

I.E.> YOU, YOURSELF are doing something wrong if you cannot even afford to keep the very equipment that is meant to make you your profits in tip-top shape. Any sort of duct tape and bailing wire approach to problems in trucking is a quick way to make people go broke at an even faster rate in the end. It has been seen time and again on here, and that was/is my point in the previous post(s). That is why I am so quick to push back against someone who is 'cheeping it out' to get by, instead of investing properly in their future.

Someone can choose to disagree all they want to, but my statements are not from someone who does not know any better, or are sitting on some kind of theoretical horse here when I say these harsh reality of things.

People forget too easily that I have truck(s) of my own ... and I haul the lowest rent s$it, cheapest freight out there. This, yet I can still afford to replace my equipment if needed + do proper repairs that will make me a profit instead of chasing broke, band-aided s$it over and over like a cat trying to catch its own tail. .. and NO, it is not because I have a forum and such. My truck makes me my moneys, and this place barely breaks even if I am lucky most of the time, so it is certainly NOT supplementing my trucking operations at all.

- It is well founded that there is no money or profit at the end of the day with most short term fixes that costs someone more down time and moneys in the long stretch. No room at all with that kind of thinking/strategy in this industry. I am quick to point it out because of this.

There are ways to make decent and good moneys in this industry so that a person can properly maintain and afford to do things 100% right, which always yields the highest long term profits.

.. So if it is not working out for someone, and they are broke all the time, unable to afford proper repairs, or that inframe that is due, .. then they need to figure out what they, themselves are doing wrong. This is NOT the industries fault.

I.E.> There is little to no room for chasing fools ideas and dickel-dime-it, save a dollar now repairs, so that it can cost you thousands later on + even more down time (= more lost revenue), with such narrow profit margins already in trucking. Everything has to be planned well, proper investment made instead of throwing moneys at problems in hopes that they go away.

I made this forum to help others with their trucks, and part of this is to identify and point this out when needed. Help people with their equipment long term, so that they can keep the moneys going int he right direction (your wallet), and not some half-baked, short term, wasting moneys only to be down again with the same (or bigger) problems to bite at them all over again.

So yeah.. I was quick to delete your previous post(s) there so that others do not take it as proper advice in the future.

I am also not here to make drama and argue with people. This place is not a free-for-all. That is what social medai is for, so you have been muted for now to prevent further spamming of those ideas onto the forum.

it is like you already mentioned...
If the engine has that many miles on it already (800k+) .., the head is obviously worn out like you say, then its time to inframe it + do any extra steps beyond the norm to extend the engine life above normal while you are at it. - Investing in its future correctly so that you can get a proper, guaranteed return on all the moneys spent over the next several years.. and not trying to nickel=-and-dime it to death, risking it all (hydra-lock, bent rod, piston thru the block, etc.) in the event that it does not work out, considering that age especially.

Also.. the vehicle now has 800k+ miles. Where is all the long term profits that have been saved/made up for such an event (such as an inframe) that is in fact inevitable!?. -- Have you owned it since new? .. or just purchased it recently?>... and if so, why did you not plan ahead of time, knowing it was already long in the tooth and could indeed need major work at any time at this point?. - Again.. this goes right back to managing your business, making proper strategies, planning for the future properly, and not trying to 'wing-it' on a hope and a prayer all the damn time.

- My point here in all of this extra ranting is that this seems to be yet another example that is seen over and over with people who own their own trucks, yours just happens to be an example of it is all. Too many people any more, trying to get by with repairs that are not likely to work out so well long term, is one of the most repeated mistakes seen around here.

Seems also that many ppl are not looking into the future properly with their trucking operations, hoping it will last a few more years ... never saving up for that major repair, never doing preventative stuffs properly, etc. yet still know its coming down the pipe, and then trying to string it along as long as possible due to poor financial situations, management/planning.

I am simply the messenger in all of this, the beer is talkin' at this point, but we know that everyone hates the messenger when it strikes home for them.