Injector leak test

[Nhramember]

I still am getting code559 active then inactive. Did cutout test all passed. Do I have to buy the whole cap off kit or just 1 to test them individually ? The fuel pump is a lil bit over a year old new tappets. It’s got a new banjo bolt in the back of the head too.I’m gonna check pump too. Ideas anyone. Thanks

[Rawze]

will it pass a leak-down test?...
what is the leak rate in one minute?.
ref: http://rawze.com/forums/showthread.php?t...3#pid75483

[Nhramember]

Hey rawze I noticed the code just code came back on at the top of 12 th gear 1400 rpm. Never does it in the lower gears. I’m gonna run rail pressure test again .

[Nhramember]

(11-20-2023 )Nhramember Wrote:  Hey rawze I noticed the code just code came back on at the top of 12 th gear 1400 rpm. Never does it in the lower gears. I’m gonna run rail pressure test again .

Ok just did 2 fuel leakage test first was 28967 minus 23639 at end of first equals 5328. I ran a second test 28885-23650 equals 5205 in 1 min. There is a leak right ? Put new fuel pump and tappets in last year. Where do I go now to check for leak. Thanks Nate

[Rawze]

maybe this thread helps...
http://rawze.com/forums/showthread.php?t...9#pid78669