Doing cams and front structure
10-06-2016, (Subject: Doing cams and front structure ) 
Post: #16
RE: Doing cams and front structure
(10-06-2016 )Brock Wrote:  getting it all cleaned up. injector cam was good so I just grabbed a used valve cam and 4 used rockers from a cummins cert mechanic shop. Rear cam seals were leaking bad so off came the doghouse... What a pain that was!

This is gonna feel like a brand new truck to me. Vibratech dampner, new motor mounts, good cams with a proper valve set. Now I'll be able to see exactly what @m*m^2 feels like.

Well, while your doing the front end of your engine, I'm planning the back end of mine. My rear structure leak is starting to leave drop marks on the ground now. Think it's gonna be a Christmas/New Years week job...


User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
replyreply


Messages In This Thread
RE: Doing cams and front structure - Pigpen 2868 - 10-03-2016,
RE: Doing cams and front structure - Hammerhead - 10-06-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.