Doing cams and front structure

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 05-15-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Doing cams and front structure

10-06-2016, (Subject: Doing cams and front structure )

Post: #17

Brock

Offline

The Forum Idiot (1116 Likes)

Posts: 1,290
Joined: Nov 2015

Thanks: 1261
Given 1116 thank(s) in 532 post(s)

RE: Doing cams and front structure

(10-06-2016 )Hammerhead Wrote:
(10-06-2016 )Brock Wrote: getting it all cleaned up. injector cam was good so I just grabbed a used valve cam and 4 used rockers from a cummins cert mechanic shop. Rear cam seals were leaking bad so off came the doghouse... What a pain that was!

This is gonna feel like a brand new truck to me. Vibratech dampner, new motor mounts, good cams with a proper valve set. Now I'll be able to see exactly what @m*m^2 feels like.

Well, while your doing the front end of your engine, I'm planning the back end of mine. My rear structure leak is starting to leave drop marks on the ground now. Think it's gonna be a Christmas/New Years week job...

My hand was forced. unloading down at hardisty and they didn't like the oil leaks on my truck so they booted me off site till I got them fixed.

User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit.

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

Doing cams and front structure - Brock - 10-03-2016,

RE: Doing cams and front structure - Pigpen 2868 - 10-03-2016,

RE: Doing cams and front structure - Signature620 - 10-04-2016,

RE: Doing cams and front structure - hhow55 - 10-04-2016,

RE: Doing cams and front structure - Brock - 10-04-2016,

RE: Doing cams and front structure - Hammerhead - 10-04-2016,

RE: Doing cams and front structure - Brock - 10-04-2016,

RE: Doing cams and front structure - hhow55 - 10-04-2016,

RE: Doing cams and front structure - Texasdude74 - 10-05-2016,

RE: Doing cams and front structure - Rawze - 10-06-2016,

RE: Doing cams and front structure - Texasdude74 - 10-06-2016,

RE: Doing cams and front structure - Rawze - 10-05-2016,

RE: Doing cams and front structure - Brock - 10-05-2016,

RE: Doing cams and front structure - preacherboy24 - 10-06-2016,

RE: Doing cams and front structure - Brock - 10-06-2016,

RE: Doing cams and front structure - Hammerhead - 10-06-2016,

RE: Doing cams and front structure - Brock - 10-06-2016

RE: Doing cams and front structure - Hammerhead - 10-06-2016,

RE: Doing cams and front structure - hhow55 - 10-06-2016,

RE: Doing cams and front structure - Brock - 10-07-2016,

RE: Doing cams and front structure - Hammerhead - 10-08-2016,

RE: Doing cams and front structure - Rawze - 10-08-2016,

RE: Doing cams and front structure - Brock - 10-08-2016,

RE: Doing cams and front structure - Brock - 10-13-2016,

RE: Doing cams and front structure - Hammerhead - 10-13-2016,

RE: Doing cams and front structure - in2trux - 10-13-2016,

RE: Doing cams and front structure - RPM1 - 10-13-2016,

RE: Doing cams and front structure - RPM1 - 10-13-2016,

RE: Doing cams and front structure - Hammerhead - 10-14-2016,

RE: Doing cams and front structure - RPM1 - 10-14-2016,

RE: Doing cams and front structure - Brock - 10-14-2016,

RE: Doing cams and front structure - Running rough - 10-14-2016,

RE: Doing cams and front structure - Hammerhead - 10-14-2016,

RE: Doing cams and front structure - Running rough - 10-14-2016,

RE: Doing cams and front structure - Brock - 10-15-2016,

RE: Doing cams and front structure - Rawze - 10-16-2016,

RE: Doing cams and front structure - Brock - 10-16-2016,

RE: Doing cams and front structure - preacherboy24 - 10-17-2016,

RE: Doing cams and front structure - Brock - 10-17-2016,

RE: Doing cams and front structure - RPM1 - 10-17-2016,

RE: Doing cams and front structure - in2trux - 10-17-2016,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design