Taking the plunge into o/o. Just bought a 2013 Pete 389 with 240k on it. Watched the vids on YouTube and was wondering where the delta p, Imap, and back pressure sensors are on my truck. Wanna do an egr tune up to get started on the right foot. Nice to see a forum where people actually wanna help and not just sh!t on each other. Can somebody help a new guy out? Pictures would be helpful too. Thanks.
Differential pressure sensor (deltaP) is on the passenger's side of the block at the rear of the engine (thank snailexpress for the correct location).
If you sign up at Cummins quick serve it is free and you can access the manuals, diagrams and all the sensors.
(06-12-2016 )biscuits and gravy Wrote: [ -> ]Differential pressure sensor (deltaP) is on the driver's side of the block at the rear of the engine on most ISX. I'm not for sure on the 2250.
If you sign up at Cummins quick serve it is free and you can access the manuals, diagrams and all the sensors.
On 2250/2350 deltaP is on the passenger side
I have the day off tomorrow. I have a 2250 and will post pictures of the sensor locations, unless someone posts here first.
Please do that, as I would like to know myself, even though I have a CM871. I have been asked about there locations on the 2250 and I have no clue.
Thanks guys! Any and all help appreciated.
(06-12-2016 )Billdozer2 Wrote: [ -> ]I have the day off tomorrow. I have a 2250 and will post pictures of the sensor locations, unless someone posts here first.
(06-12-2016 )Rawze Wrote: [ -> ]Here is another thread with pictures...
http://rawze.com/forums/showthread.php?t...87#pid1087
And done!! Haha!! Thanks Raze! I thought I remember seeing pictures somewhere here. Just could not remember where at.