03-29-2023,
2013 ISX 15 CM2350
In January I had the Rod/Main bearings replaced (797,000 miles). Before I left the shop I asked him about what I had assumed the oil leak to have been my pan gasket. He said no it wasn't. He said that Cummins uses a metal gasket on the front housing cover of these engines and that over time the metal gasket wears on the housing itself (he showed me on that they had removed how it had formed a groove like indention. He basically stated to me that the only way to fix that leak is a new front housing cover.
Not wanting to take his word as truth or false I figured I'd ask here. Obviously if that's the only way to repair this leak that's not going to be an inexpensive fix so I thought I'd get some advise here before starting the hunt for such a project.
In January I had the Rod/Main bearings replaced (797,000 miles). Before I left the shop I asked him about what I had assumed the oil leak to have been my pan gasket. He said no it wasn't. He said that Cummins uses a metal gasket on the front housing cover of these engines and that over time the metal gasket wears on the housing itself (he showed me on that they had removed how it had formed a groove like indention. He basically stated to me that the only way to fix that leak is a new front housing cover.
Not wanting to take his word as truth or false I figured I'd ask here. Obviously if that's the only way to repair this leak that's not going to be an inexpensive fix so I thought I'd get some advise here before starting the hunt for such a project.