Rawze.com: Rawze's ISX Technical Discussion and more

Does anyone have any experience with Paccar ESA and configuring a CECU3 units to allow Can Bus communications to and from a PLC (programmable logic controller)?

Looking to be able to read speeds, loads, pressures, and temps and write commands such as PTO engagement and rpm set points.

(11-29-2023 )HeavyIndustry Wrote: [ -> ]Does anyone have any experience with Paccar ESA and configuring a CECU3 units to allow Can Bus communications to and from a PLC (programmable logic controller)?

Looking to be able to read speeds, loads, pressures, and temps and write commands such as PTO engagement and rpm set points.

Most cummins engines have a data-link control available on them for that type of application. Might want to contact them and get some info on it and how to program/control it.