![]() |
Entire Coolant System Flush - Printable Version +- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums) +-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1) +--- Forum: Ask Your question... (/forumdisplay.php?fid=45) +--- Thread: Entire Coolant System Flush (/showthread.php?tid=10200) |
Entire Coolant System Flush - Porterave - 07-05-2025 I need to flush and clean the entire coolant system. When refilling with coolant, can I bleed the air out of the coolant system without a vacuum pump? This is a Freightliner Cascadia 2016 DD15 If not, any affordable manual vacuum pump? RE: Entire Coolant System Flush - Rawze - 07-05-2025 You will need a cheap vacuum pump to purge all the air out for the last gallon or 2. YOu can get one a harbor freight, + a coolant test set to get the job done. As far as flush goes,.. the 'cummins restore' coolant flush, or similar product is good for getting oil and other contaminants out of the coolant system RE: Entire Coolant System Flush - Xpressd - 07-09-2025 (07-05-2025 )Rawze Wrote: As far as flush goes,.. the 'cummins restore' coolant flush, or similar product is good for getting oil and pother contaminants out of the coolant systemFleetguard's Part #: CC2610X is the stuff we use ![]() ~$20 / jug |