+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Counter-bore tools and parts... (/showthread.php?tid=1339)
Counter-bore tools and parts... - Rawze - 01-09-2017
Came across this today. Just putting it here for anyone that may be looking for such things...
[attachment=2344]
and..
[attachment=2345]
Parts:
5298564 - Hardened bronze shim 0.020"
5298564 - Hardened bronze shim 0.032"
===
Procedure for the ISX 870/871/2250/2350...
https://quickserve.cummins.com/qs3/pubsys2/xml/en/procedures/132/132-001-058-tr-mixar5.html?q=counterbore
(update 06-03-2018): When following this procedure, just keep in mind that most people on this forum including myself agree that a liner height of 0.014" is much better than factory height of 0.010" for longevity reasons.
==========
Here is the same tool from Apex. This is the one I own, and it works very well too..
https://www.apexinds.com/tools/M50145.html
RE: Counter-bore tools and parts... - Starlight - 01-09-2017
(01-09-2017 )Rawze Wrote: Came across this today. Just putting it here for anyone that may be looking for such things...
and..
Parts:
5298564 - Hardened bronze shim 0.020"
5298564 - Hardened bronze shim 0.032"
===
Procedure for the ISX 870/871/2250/2350...
I wouldnt go that route, thats the cummins cutter. I bought the monaco tool which was alot cheaper and was complete not like the cummins tool which makes you buy 2 part numbers to make the kit. Cummins tool when i priced it a couple years ago was 11.4 k versus the monaco tool complete for just under 2200. Thought Id share. Apex tool sells the monaco for those who are in the market for it.
RE: Counter-bore tools and parts... - Hammerhead - 01-09-2017
(01-09-2017 )Starlight Wrote: I wouldnt go that route, thats the cummins cutter. I bought the monaco tool which was alot cheaper and was complete not like the cummins tool which makes you buy 2 part numbers to make the kit. Cummins tool when i priced it a couple years ago was 11.4 k versus the monaco tool complete for just under 2200. Thought Id share. Apex tool sells the monaco for those who are in the market for it.
I have found that parts pricing Genuine Cummins parts at the actual Cummins dealer (Cummins Western Canada) out here is basically US$ to CDN$ with exchange plus about 5%.
However, when pricing Genuine Cummins tools CWC is basically take US pricing and double it plus 5%, so obviously I buy all my Gen Cummins tools south of the 49th.
What kind do you have again Rawze? I know you shared a link with me, but life happened and I haven't purchased one yet,must it's still on my list of equipment to aquire.
Is that Apex Supply in Canada you are referring to Starlight?
RE: Counter-bore tools and parts... - Starlight - 01-09-2017
(01-09-2017 )Hammerhead Wrote:(01-09-2017 )Starlight Wrote: I wouldnt go that route, thats the cummins cutter. I bought the monaco tool which was alot cheaper and was complete not like the cummins tool which makes you buy 2 part numbers to make the kit. Cummins tool when i priced it a couple years ago was 11.4 k versus the monaco tool complete for just under 2200. Thought Id share. Apex tool sells the monaco for those who are in the market for it.
I have found that parts pricing Genuine Cummins parts at the actual Cummins dealer (Cummins Western Canada) out here is basically US$ to CDN$ with exchange plus about 5%.
However, when pricing Genuine Cummins tools CWC is basically take US pricing and double it plus 5%, so obviously I buy all my Gen Cummins tools south of the 49th.
What kind do you have again Rawze? I know you shared a link with me, but life happened and I haven't purchased one yet,must it's still on my list of equipment to aquire.
Is that Apex Supply in Canada you are referring to Starlight?
Thanks Hammerhead for clarifying cummins pricing. ( rip offs ) Makes sense. I bought my monaco from Apex Tools in Minneapolis somewhere. Canadian Apex dealers had a long wait time for this tool at the time.
RE: Counter-bore tools and parts... - Unilevers - 01-09-2017
he runs the monaco aswell, its a great tool.
RE: Counter-bore tools and parts... - Signature620 - 01-09-2017
I've been thinking about ordering the Monaco set. Is it easy enough to get parts and cutter bits for that one?
RE: Counter-bore tools and parts... - Starlight - 01-09-2017
(01-09-2017 )Signature620 Wrote: I've been thinking about ordering the Monaco set. Is it easy enough to get parts and cutter bits for that one?Yes. Directly from Apex or there are a couple other tool suppliers that sell replacement parts.
RE: Counter-bore tools and parts... - Rawze - 01-09-2017
(01-09-2017 )Unilevers Wrote: he runs the monaco aswell, its a great tool.
Correct. this is the one I own..
https://www.apexinds.com/tools/M50145.html
It works very well.
RE: Counter-bore tools and parts... - Hammerhead - 01-09-2017
(01-09-2017 )Rawze Wrote:Yeah, I watched your rebuild video series.(01-09-2017 )Unilevers Wrote: he runs the monaco aswell, its a great tool.
Correct. this is the one I own..
https://www.apexinds.com/tools/M50145.html
It works very well.
It appeared very nice to operate, and looked like it cut the block like butter.