+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Front crank seal (/showthread.php?tid=1468)
Front crank seal - joed2323 - 02-13-2017
I have a cm2250, what specialty tools would I need to replace this seal? Also what parts would I also need besides the seal?
I've done them on series 60s and I thought they were a fairly easy to do.
RE: Front crank seal - snailexpress - 02-13-2017
(02-13-2017 )joed2323 Wrote: I have a cm2250, what specialty tools would I need to replace this seal? Also what parts would I also need besides the seal?cummins quickserve best place to find answers. It's free just register engine serial #
I've done them on series 60s and I thought they were a fairly easy to do.
RE: Front crank seal - Brock - 02-13-2017
My mechanic says they are very easy to screw up which is why he always has a spare.
RE: Front crank seal - Hammerhead - 02-13-2017
(02-13-2017 )joed2323 Wrote: I have a cm2250, what specialty tools would I need to replace this seal? Also what parts would I also need besides the seal?
I've done them on series 60s and I thought they were a fairly easy to do.
You need tool part #3162992 Front Crank Seal Remover/Installer to do this procedure with the best chance of success.
The procedure is in Quickserve->ISX Service Manual->Section 1 Cylinder Block->10-001-023 Crankshaft Seal, Front