Rawze.com: Rawze's ISX Technical Discussion and more
Wait starter cool down enforced - Printable Version

+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: Ask Your question... (/forumdisplay.php?fid=45)
+--- Thread: Wait starter cool down enforced (/showthread.php?tid=1637)



Wait starter cool down enforced - GhumanTruckService - 03-30-2017

Need help I just parked at the flying j and turned off my truck kenworth t660 2012 cummins isx15 and went inside after I came back my truck would not turn over like nothing would happen I turned the key and I got a code saying wait starter cool down enforced if anyone know what happened please let me know


RE: Wait starter cool down enforced - Rawze - 03-30-2017

Haven't heard of an ISX doing that but plenty of Detroit DD15's. The starter on the DD15 is located on the exhaust side and would overheat due to bleed-off from the exhaust manifold if you shut if off after climbing a big hill. Sometimes they would not start for 20 minutes or more from it.


RE: Wait starter cool down enforced - in2trux - 03-31-2017

The is a terminal off the starter relay for over crank protection, one wire.
I left it off and wrapped up because we're smart enough to know not to do it.
Thats on a 871,Pete Delco MT starter.

Should be the same for Mitsu starter.