+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Turbo Actuator Position (percent closed) (/showthread.php?tid=1700)
Turbo Actuator Position (percent closed) - HankAz - 04-22-2017
I'm playing around with the forced regen. On Rawze's video it is showing it is 96 percent. On mine it is showing 85 percent. Question is there a problem because it is not 96 or are they all different?
RE: Turbo Actuator Position (percent closed) - Nilao - 04-22-2017
You need to also have it show you commanded position. Different charge air configurations need different amounts of backpressure. As long as commanded and actual match you're golden.
RE: Turbo Actuator Position (percent closed) - Rawze - 04-23-2017
Nilao is right. Make sure you have the right ECM program for the truck too. I know some programs will command it to only 45% during regen, some are as high as 95+%. It is different based on the air flow design of the truck itself and not just the engine.
http://rawze.com/forums/showthread.php?tid=1
RE: Turbo Actuator Position (percent closed) - HankAz - 04-23-2017
Ok thanks