+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Cm2350 egr outa calibration (/showthread.php?tid=2762)
Cm2350 egr outa calibration - schISM - 02-14-2018
I've got a CEL for egr out of calibration on a cm2350. Anybody have experience with this one? Can I disassemble and clean or is it toast?
RE: Cm2350 egr outa calibration - snailexpress - 02-14-2018
To be short
[attachment=3580]
RE: Cm2350 egr outa calibration - jimeneztrans84 - 02-14-2018
Some guys clean them
RE: Cm2350 egr outa calibration - schISM - 02-15-2018
I took it off and it didn't look all that bad. Cleaned it up but it still threw a 1896 and 2272 FC. Took a closer look into the top side of the valve and it looks like the board got a little hot where the terminals are soldered in. Peterbilt said $1049, I said no thanks and got one from a buddy who had a delete done.
I've been switching back and forth between a cal. that shuts it off thinking it wouldn't matter. Lesson learned, gonna have to figure out how to isolate the valve until I'm ready to do away with it.
RE: Cm2350 egr outa calibration - Wiseman - 02-15-2018
It hurts! Doesn’t it?
Looking at the top two pictures . What a crapptasstique ingenuity !
It says all over : Eat your shitttt and comeback for more !!!
Ready or not , just do it .