+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Pin the Motor to replace air compressor (/showthread.php?tid=2831)
Pin the Motor to replace air compressor - Waterloo - 03-06-2018
When I bar the motor and get the damper lined up with the "Pin" mark, does it matter in regards to TDC to install the compressor? Or, just make sure that I bar to the "pin" mark and disregard TDC like when doing the overhead?
RE: Pin the Motor to replace air compressor - Rawze - 03-06-2018
just the "pin" position.