+- Rawze.com: Rawze's ISX Technical Discussion and more (http://rawze.com/forums)
+-- Forum: Big Truck Technical Discussion... (/forumdisplay.php?fid=1)
+--- Forum: ISX Related Help (/forumdisplay.php?fid=68)
+--- Thread: Programmer (/showthread.php?tid=2837)
Programmer - blown2250 - 03-07-2018
I need help finding a good ECM person I have fell into the nasty delete guy and costing me a fortune
RE: Programmer - Waterloo - 03-07-2018
(03-07-2018 )blown2250 Wrote: I need help finding a good ECM person I have fell into the nasty delete guy and costing me a fortune
Mr Hagg in GA or Gearhead in PA. Do you have an Inline reader with Insight?
Here is Mr Hagg's shop...
Haggai Automotive And Diesel Repair
Address: 1228 High Falls Rd
Griffin, GA 30223
Phone: (678) 688-8107
If in Western Canada, shoot Unilever a PM.
RE: Programmer - zyNoT - 03-15-2018
(03-07-2018 )Waterloo Wrote:(03-07-2018 )blown2250 Wrote: I need help finding a good ECM person I have fell into the nasty delete guy and costing me a fortune
Mr Hagg in GA . Do you have an Inline reader with Insight?
Here is Mr Hagg's shop...
Haggai Automotive And Diesel Repair
Address: 1228 High Falls Rd
Griffin, GA 30223
Phone: (678) 688-8107
If in Western Canada, shoot Unilever a PM.
These are literally the two best shops. Been to both myself.